› › › Almo Inc Made-in-Japan.BZ | Japanese made Products and Services

 Sample products made in Japan Sample Products
Maru Nomi (Carving Tools) Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.
Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Change Valve Mechanical & Electromagnetism
Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics. 

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum. 

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.
Change Valve
Kondo Seiki Co., Ltd

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached. 
The accuracy surface is high precision and light weight. 
By moving the slider, straightness can easily be measured. 
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value 
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing. 

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily. 
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured 
Before measurement, perform zero setting on the master surface plate. 

Roll Caliper
For measuring large rolls. 
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron ) 
4 pcs of job run roller have bearings in them and they are precision grinded. 
Movement on the roll is slow and smooth. 
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work. 
A 0.01mm graduation dial gauge is supplied with the product. 

 ・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.
Straightness Measuring Instruments
Obishi Keiki Seisakusho

Solenoid Valves We manufacture various types of solenoid valves. Please contact us for more.
Solenoid Valves
Kondo Seiki Co., Ltd

Special Measurement Equipment Universal Type Camshaft Measuring equipment

This eqipment is representative of our [SE 121 Model ] of camshaft shape measurement equipment is a high performance model, with automatic measurement as a presupposition, and detailed data requirement. 
For this reason, in many cases, acquisition of operating skills is required for its operation. 
Operation of the machine is completely manual because of the assumption that the equipment will also be used on inline processes. 
It is a highly versatile camshaft measuring equipment. No special operating skills are required. 
Required ideal position angle and lift amount is displayed. 
Also the displayed values can be printed out from a special embedded small sized printer.
Special Measurement Equipment
Obishi Keiki Seisakusho

 More Products made in Japan More Categories
Almo Inc logo Almo Inc
Nagaoka Niigata, Japan
Content is owned and copyrighted to Almo Inc

Main Business Lines

Aluminum and shell molding supplies. Dynamic company providing high quality, reasonable cost and timely products.
Welcome to Almo

New Products & Services

No offers available


Contact Information for Almo Inc

Company Name: Almo Inc
Contact Person: Shibaki
Address: Nagaoka Niigata, Japan
Phone: 0258-20-5300
Fax: 0258-20-5301
E-mail: Send Message


 
Featured products made in Japan Featured Listing
Kondo Seiki Co., Ltd We manufacture various equipment for industrial use including the following;
Complete set of water jet  nozzles
Pattern plate cams for circular knitting machine.
Automatic pattern setters for circular knitting machine pattern wheel. (To be controlled by a microcomputor)
Consumption machine parts.
Manufacturing and remodeling of various machines for labor-saving. Kondo Seiki Co., Ltd Niigata Mitsuke city
We manufacture various equipment for industrial use including the following; Complete set of water jet nozzles Pattern plate cams for circular knitting machine. Automatic patte...
SIP Co., Ltd In addition to our original Noboru-kun LS Series (mechanical lifters), we design and develop custom made lifting platforms and lifters that can be used in a wide variety of locations for a wide variety of uses.
Our machines are deigned in-house, therefore we accomodate all types of orders from prototypes to mass production. SIP Co., Ltd Niigata Niigata
In addition to our original Noboru-kun LS Series (mechanical lifters), we design and develop custom made lifting platforms and lifters that can be used in a wide variety of locatio...
Ikeda Tools Co., Ltd For over 10 years we have exported an extensive range of Japanese tools all over the world including: -
 
Carving tools - Chokokuto,Chisels - Nomi, Hammer - Genno, Kitchen knives - Hocho, Pull saws - Nokogiri, sharpening stones - Toishi, and more...

Some of the tools are designed by us and made from famous manufacturers and toolmakers, like Ikeda, Tasei, Kawasei, just to name a few.

We do not only export tools, we also design some and have them OEM made. So we will also welcome inquiries for OEM made tools.

We are looking for Distributors, Importers, Mailorder companies, Retailers and Sharpening Pro's in most parts of the world. Ikeda Tools Co., Ltd Yamanashi Fuji-kawaguchiko-machi
For over 10 years we have exported an extensive range of Japanese tools all over the world including: - Carving tools - Chokokuto,Chisels - Nomi, Hammer - Genno, Kitchen knives...
KONDO SEIKI Manufacturer of Circular Knitting Machine Parts (Cams, mimingers and feeders). Water jet nozzle and plunger KONDO SEIKI Niigata Mitsuke
Manufacturer of Circular Knitting Machine Parts (Cams, mimingers and feeders). Water jet nozzle and plunger
Almo Inc Aluminum and shell molding supplies. Dynamic company providing high quality, reasonable cost and timely products.
Welcome to Almo Almo Inc Niigata Nagaoka
Aluminum and shell molding supplies. Dynamic company providing high quality, reasonable cost and timely products. Welcome to Almo