Transportation › Auto Engine Parts › Piston Rods Made-in-Japan.BZ

Sitemap
Japanese Transportation , Auto Engine Parts , Piston Rods products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 24, 2012, 11:06 am

Members Area

Japanese

View Gooooogled Versions

Transportation › Auto Engine Parts › Piston Rods

Sample Products

Angle Measuring Equipment Universal Angle Plate
Angular Combination Block
Swivel Type Angle Plate
Sine Plate
Double Type Sine Plate
Sine Base
Sine Bar
Sine Base with Center
Sine Bar with Centers
Universal Bevel Protractor
Large Sized Bevel Plate (Motor Drive) Example
Double Type Sine Plate (2-Way Inclination) Example
Motor-driven Sine Table Example
Rotating Tilt Table Example

Angle Measuring Equipment
Obishi Keiki Seisakusho

Load Control and Measurement EA/WA/EAF:
The measuring instruments EA/WA/ EAF transmit and record information on the loads and accidents at AC substations and in AC systems of DC substations. They also store the information for 45 days and can record/reproduce it when necessary

ES:
The measuring instruments ES transmits voltage, current, and accident signals of power receiving and feeding systems at DC substations. They also store the information for 45 days and record/ reproduce it when necessary.

Load Control and Measurement
Showa Electronics Co., Ltd
Harmonic power recorder The harmonic power recorder PR-300 is a portable logger to control single- and three-phase loads with a clamp CT. It analyzes harmonics and stores measurements in a memory card, from which the data is read out onto a personal computer for entry into various load control record books. It’s used to reproducevoltage/current waveforms and analyze their orders.

Harmonic power recorder The harmonic power recorder PR-300 is a portable logger to control single- and three-phase loads with a clamp CT. It analyzes harmonics and stores measurements in a memory card, from which the data is read out onto a personal computer for entry into various load control record books. It’s used to reproducevoltage/current waveforms and analyze their orders.

Harmonic power recorder
Showa Electronics Co., Ltd

More Categories

Transportation
Auto Engine Parts
Piston Rods

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Digital Curvimeter The COMCURVE-8 makes it possible to measure lines of any shape or any scale factor easily with
slmple operatlon. All you have to do is put the trace point of the equipment on the ilne to be
measured and let it trace the line from the starting point to the end of the required lenqth.
Digital Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly
Time Recording Products
Amano Corporation

Precision Granite Surface Plate
Obishi Keiki Seisakusho

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

Load Control and Measurement
Showa Electronics Co., Ltd

Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured.
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand)
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.
Precision V Blocks
Obishi Keiki Seisakusho

Pulse converter SPT-2KA The pulse converter SPT-2KA receives pulse signals from the K1, make and make-break contacts of watt-hour meters, and outputs to power control terminal devices through a contact. This output is first converted into a 1- to 1/9999-pulse signal used by the terminal devices. The power source voltage is DC 100V.
Pulse converter SPT-2KA
Showa Electronics Co., Ltd

Input conversion unit The input conversion unit SSC-U3 has a multi-transducer function to convert three-/single-phase voltage and input current and outputs their effective values, active power, reactive power, power factor, and frequency. The unit can be directly connected to data recorders, pen recorders, and other measuring instruments.
Input conversion unit
Showa Electronics Co., Ltd

Featured Products

Angle Measuring Equipment
Obishi Keiki Seisakusho

Universal Angle Plate Angular Combination Block Swivel Type Angle Plate Sine Plate Double Type Sine Plate Sine Base Sine Bar Sine Base with Center Sine Bar with Cen.......

Nomi (Chisels)
Ikeda Tools Co., Ltd

A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying.......

Electronic watt-hour meter
Showa Electronics Co., Ltd

Showa Electronics offers an electronic watthour meter and peripheral devices that have high precision and high durability compared to conventional mechanical instruments. The ele.......

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Straightness Tester, repeat meters, and roll calipers. Straightness Tester On the granite standard straight edge lower surface, 3 saddle supports are attached. The accuracy s.......

Precision V Blocks
Obishi Keiki Seisakusho

2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured. Very convenient for round objects, and other types of inspection or as supporting block (Rec.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Load Control and Measurement
Showa Electronics Co., Ltd

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Water Jet Nozzle and Plunger Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd

Option tools for RMB-1&HMB-E Please come to our English web site, you can check the all of option tools.

Option tools for RMB-1&HMB-E
Shinto Sangyo Co., Ltd