Pneumatic & Hydraulic Tools › Hand Tool › Pliers Manufacturers Made-in-Japan.BZ

Sitemap
Japanese Pneumatic & Hydraulic Tools , Hand Tool , Pliers Manufacturers products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

February 10, 2012, 9:04 pm

Members Area

Japanese

View Gooooogled Versions

Pneumatic & Hydraulic Tools › Hand Tool › Pliers Manufacturers

Sample Products

Hocho - Akifusa Japanese Knives (1) We offer a broad range of Japanese kitchen knives.
Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is unsurpassed. Our product selection ranges from the noble Japanese knife to the professional knives, art work and collectors' items.

We also design knives and have them OEM made. We welcome OEM inquiries as well.

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

Emmergency Releif Food (RiceRN) Nutritionally balanced food mainly for emmergency. Can be eaten instantly by simple addition of water.
It is flaked and can be eaten by babies, children, adults, and aged persons thereby eliminating the need for special provision for babies or aged people.

It contains no meat and therefore can be eaten by people of all religions.

Emmergency Releif Food (RiceRN)
MATSUYA

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

More Categories

Pneumatic & Hydraulic Tools
Hand Tool
Pliers Manufacturers

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

WH transmitter SDF The WH transmitter SDF continuously calculates and displays the pulses of electrical energy recorded at maximum eight watt-hour meters, transmits the data to terminal devices on a regular basis and outputs time-series index values for the past 12 hours. It also has a built-in pulse conversion function.
WH transmitter SDF
Showa Electronics Co., Ltd

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd

Solenoid Valves We manufacture various types of solenoid valves. Please contact us for more.
Solenoid Valves
Kondo Seiki Co., Ltd

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.
Nomi (Chisels)
Ikeda Tools Co., Ltd

Input conversion unit The input conversion unit SSC-U3 has a multi-transducer function to convert three-/single-phase voltage and input current and outputs their effective values, active power, reactive power, power factor, and frequency. The unit can be directly connected to data recorders, pen recorders, and other measuring instruments.
Input conversion unit
Showa Electronics Co., Ltd

Power monitoring system
Showa Electronics Co., Ltd

Featured Products

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

We offer a broad range of Japanese kitchen knives. Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is uns.......

Natural Seasoning (Tennendashi)
MATSUYA

By natural we mean natural. This product is a ntaural tasty seasoning made from ingredients of sardine, kelp, dried bonito, and mushroom. it contains no additives or antioxidants.

Setting Machine
Nakaya Co. Ltd

&#9632;For setting a saw teeth automatically. &#9632;Any type of blades can be done by NC

Handy Belt Sander
Shinto Sangyo Co., Ltd

Roller Minico can be operated by one hand. The powerful torque is unimaginable from the super compact body. Roller Minico series have a wide variety of option tools such as sanding.......

Synchronization testers
Showa Electronics Co., Ltd

The synchronization testers S25P/S25N monitor the synchronization between different power sources based on the voltage phase and voltage difference(vector difference). They then ou.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Straightness Measuring Instruments
Obishi Keiki Seisakusho

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured.
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand)
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.

Precision V Blocks
Obishi Keiki Seisakusho

Nishikigoi (Carps) A warm welcome and great koi await all koi buyers at Miyaishi Koi Farm. Based in the very heart of Ojiya, whether you are looking for high quality jumbo koi or a vast range of Tosai, 2 and 3 year old koi of all varieties then make sure you visit us.

Miyaishi Koi Farm with JKX can offer a great selection of koi at the very lowest price. Established for over 60 years Miyaishi is establish as one of the leading koi breeders in Japan. Other breeders throughout Japan keep a very close relationship with them, not just for their koi but also to buy and use Miyaishi's own range of koi food for their koi and buy the large range of dry goods that they supply through their wholesale company. This close association with other breeders also benefits JKX customers when buying koi from any of these breeders. These include Aoki, Hosokai, Dainichi, Marusaka, Miyatora, Kaneko, Oofuchi, Yagenji, Otsuka, Marudo, and Torazo to name but a few.

Koi available from Miyaishi Koi Farm

A large selection of Jumbo koi from 80 - 90 cm

3 year olds - nearly 500 koi of all varieties

2 year olds - up to 4000 koi of all varieties

Tosai - up to 60,000 fish of all varieties

Nishikigoi (Carps)
Japan Koi Export