Optical & Photography Equipment › Astronomy Instruments › Telescope Made-in-Japan.BZ

Sitemap
Japanese Optical & Photography Equipment , Astronomy Instruments , Telescope products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 24, 2012, 4:03 am

Members Area

Japanese

View Gooooogled Versions

Optical & Photography Equipment › Astronomy Instruments › Telescope

Sample Products

Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured.
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand)
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.

Precision V Blocks
Obishi Keiki Seisakusho

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho
Power tester 106A The power tester 106A, which is compact and inexpensive, uses a clamp CT to measure and display the single-and three-phase voltage, current, power factor, and electrical energy. In addition, it records the data when combined with the recorder 106R.

Power tester 106A The power tester 106A, which is compact and inexpensive, uses a clamp CT to measure and display the single-and three-phase voltage, current, power factor, and electrical energy. In addition, it records the data when combined with the recorder 106R.

Power tester 106A
Showa Electronics Co., Ltd

More Categories

Optical & Photography Equipment
Astronomy Instruments
Telescope

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho

Maru Nomi (Carving Tools) Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.
Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Time Information System Products
Amano Corporation

Hocho - Akifusa Japanese Knives (2)
Ikeda Tools Co., Ltd

Hocho - Akifusa Japanese Knives (2)
Ikeda Tools Co., Ltd

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.
Nomi (Chisels)
Ikeda Tools Co., Ltd

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.
Nomi (Chisels)
Ikeda Tools Co., Ltd

Synchronization testers
Showa Electronics Co., Ltd

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho

Featured Products

Precision Granite Surface Plate
Obishi Keiki Seisakusho

Precision Surface Plate using granite gabbro It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages. In a.......

Handy Belt Sander
Shinto Sangyo Co., Ltd

Roller Minico can be operated by one hand. The powerful torque is unimaginable from the super compact body. Roller Minico series have a wide variety of option tools such as sanding.......

Precision Square Levels
Obishi Keiki Seisakusho

For precision inspection, this product is a JIS mark display permitted Grade A product. The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjuste.......

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Straightness Tester, repeat meters, and roll calipers. Straightness Tester On the granite standard straight edge lower surface, 3 saddle supports are attached. The accuracy s.......

Knitting Machine Parts
Kondo Seiki Co., Ltd

Cams, mimingers and feeders In reply to our customers' requirements for complicated patterning, we are in a position to manufacture circular knitting machine parts of a wide varie.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels)
Ikeda Tools Co., Ltd

Change Valve Mechanical & Electromagnetism
Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Change Valve
Kondo Seiki Co., Ltd

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho