Directory of Japanese products and companies in EnglishSitemap
Japanese Companies Click Here for more information
Machinery & Parts , Machine Parts , Lock Washers  products made in Japan for easy access to buyers
HOME Products and Services Made in Japan Made in Japan Made in Japan Made in Japan
July 17, 2018, 5:34 pm
Made in Japan Made in Japan
Machinery & PartsMachine PartsLock Washers
Machinery & Parts made in Japan Machinery & Parts
Pneumatic & Hydraulic Tools made in Japan Pneumatic & Hydraulic Tools
Animal & Pet Products made in Japan Animal & Pet Products
Kitchen & Houseware made in Japan Kitchen & Houseware
Industrial Supplies made in Japan Industrial Supplies
Hardware Products & Valve made in Japan Hardware Products & Valve
Furniture made in Japan Furniture
Electrical & Electronics made in Japan Electrical & Electronics
Dies & Molds made in Japan Dies & Molds
Computer & Peripherals made in Japan Computer & Peripherals
Building Materials made in Japan Building Materials
Beauty & Health Products made in Japan Beauty & Health Products
Agriculture & Food made in Japan Agriculture & Food
 Sample products made in Japan Sample Products
Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached. 
The accuracy surface is high precision and light weight. 
By moving the slider, straightness can easily be measured. 
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value 
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing. 

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily. 
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured 
Before measurement, perform zero setting on the master surface plate. 

Roll Caliper
For measuring large rolls. 
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron ) 
4 pcs of job run roller have bearings in them and they are precision grinded. 
Movement on the roll is slow and smooth. 
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work. 
A 0.01mm graduation dial gauge is supplied with the product. 

 ・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.
Straightness Measuring Instruments
Obishi Keiki Seisakusho

Order made work platforms In adition to our standard products, we design and manufacture work decks to meet the customers demands in terms of capacity, size, use environment etc.
Feel free to discuss any requirements with us. We surely can provide you with a suitable solution.
Order made work platforms
SIP Co., Ltd

Special Measurement Equipment Universal Type Camshaft Measuring equipment

This eqipment is representative of our [SE 121 Model ] of camshaft shape measurement equipment is a high performance model, with automatic measurement as a presupposition, and detailed data requirement. 
For this reason, in many cases, acquisition of operating skills is required for its operation. 
Operation of the machine is completely manual because of the assumption that the equipment will also be used on inline processes. 
It is a highly versatile camshaft measuring equipment. No special operating skills are required. 
Required ideal position angle and lift amount is displayed. 
Also the displayed values can be printed out from a special embedded small sized printer.
Special Measurement Equipment
Obishi Keiki Seisakusho

 More Products made in Japan More Categories
Aluminum Alloy Casting made in Japan Aluminum Alloy Casting
Nishikigoi made in Japan Nishikigoi
Horticulture Supplies made in Japan Horticulture Supplies
Industrial Scales made in Japan Industrial Scales
Utility Knives made in Japan Utility Knives
Executive Office Furniture made in Japan Executive Office Furniture
Fish Products made in Japan Fish Products
High Pressure Fittings made in Japan High Pressure Fittings
Hand Saws made in Japan Hand Saws
Skin Care Cosmetic made in Japan Skin Care Cosmetic
Woodworking Machinery made in Japan Woodworking Machinery
Measuring Equipment made in Japan Measuring Equipment
Furniture Accessory made in Japan Furniture Accessory
Living Room Furniture made in Japan Living Room Furniture
Japanese Home Furniture made in Japan Japanese Home Furniture
Machinery & Parts
Machine Parts
Lock Washers




List Your Products Here
Japanese Companies only

 

 

 


Nishikigoi (Carps) A warm welcome and great koi await all koi buyers at Miyaishi Koi Farm. Based in the very heart of Ojiya, whether you are looking for high quality jumbo koi or a vast range of Tosai, 2 and 3 year old koi of all  varieties then make sure you visit us. 

Miyaishi Koi Farm  with JKX can offer a great selection of koi at the very lowest price. Established for over 60 years Miyaishi  is establish as one of the leading koi breeders in Japan. Other breeders throughout Japan keep a very close relationship with them, not just for their koi but also to buy and use Miyaishi's own range of koi food for their koi and buy the large range of dry goods that they supply through their wholesale company. This close association with other breeders also benefits JKX customers when buying koi from any of these breeders. These include Aoki, Hosokai,  Dainichi, Marusaka, Miyatora, Kaneko, Oofuchi, Yagenji,  Otsuka, Marudo, and Torazo to name but a few. 
 
Koi available from Miyaishi Koi Farm 

A large selection of Jumbo koi from 80 - 90 cm 

3 year olds - nearly 500 koi of all varieties 

2 year olds - up to 4000 koi of all varieties 

Tosai -  up to 60,000 fish of all varieties
Nishikigoi (Carps)
Japan Koi Export
Protect UV+ With the global warming effect, skin troubles with UV rays are increasing. We expect the demand for Protect UV+ will also be increasing.

Since July 2011, the forth skin trouble of Burn and aging due to UV is added in the effect.
When actively participate in a sporting event outside involving scratches and exposure under sun,
Protect UV+
Earth-Blue Inc
Maru Nomi (Carving Tools) Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.
Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd
Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured. 
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand) 
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.
Precision V Blocks
Obishi Keiki Seisakusho
Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached. 
The accuracy surface is high precision and light weight. 
By moving the slider, straightness can easily be measured. 
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value 
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing. 

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily. 
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured 
Before measurement, perform zero setting on the master surface plate. 

Roll Caliper
For measuring large rolls. 
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron ) 
4 pcs of job run roller have bearings in them and they are precision grinded. 
Movement on the roll is slow and smooth. 
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work. 
A 0.01mm graduation dial gauge is supplied with the product. 

 ・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.
Straightness Measuring Instruments
Obishi Keiki Seisakusho
Knitting Machine Parts Cams, mimingers and feeders
In reply to our customers' requirements for complicated patterning, we are in a position to manufacture circular knitting machine parts of a wide variety by means of MC machine tools.

We are making constant endeavor for your laborsaving, reduction of manufacturing cost and production of vaious new products in a small quantity such as plate cams, mimingers and feeders etc.
Knitting Machine Parts
Kondo Seiki Co., Ltd
Nishikigoi (Carps) A warm welcome and great koi await all koi buyers at Miyaishi Koi Farm. Based in the very heart of Ojiya, whether you are looking for high quality jumbo koi or a vast range of Tosai, 2 and 3 year old koi of all  varieties then make sure you visit us. 

Miyaishi Koi Farm  with JKX can offer a great selection of koi at the very lowest price. Established for over 60 years Miyaishi  is establish as one of the leading koi breeders in Japan. Other breeders throughout Japan keep a very close relationship with them, not just for their koi but also to buy and use Miyaishi's own range of koi food for their koi and buy the large range of dry goods that they supply through their wholesale company. This close association with other breeders also benefits JKX customers when buying koi from any of these breeders. These include Aoki, Hosokai,  Dainichi, Marusaka, Miyatora, Kaneko, Oofuchi, Yagenji,  Otsuka, Marudo, and Torazo to name but a few. 
 
Koi available from Miyaishi Koi Farm 

A large selection of Jumbo koi from 80 - 90 cm 

3 year olds - nearly 500 koi of all varieties 

2 year olds - up to 4000 koi of all varieties 

Tosai -  up to 60,000 fish of all varieties
Nishikigoi (Carps)
Japan Koi Export
Protect X2 The skin protection cream Protect X2 has protection effect on three types of skin troubles, same with Protect X1.
Rough dry skin (especially rough hand) 
Penetration of dirt and smell into skin. 
Skin scratch with friction.
Protect X2
Earth-Blue Inc
Deflection Tester Used for Circularity Measurement of shafts, etc. 
Parallellism between table upper surface and center is assured. 
Center entry/exit is performed by one touch lever. 

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho
Featured products made in Japan Featured Products
Precision V Blocks Precision V Blocks     (Obishi Keiki Seisakusho)
2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured. Very convenient for round objects, and other types of inspection or as supporting block (Rec.......
Ultra Precision Straight Edge and Squares Ultra Precision Straight Edge and Squares     (Obishi Keiki Seisakusho)
Standardized Ultra Precision Straight Edge developed due to the demand for high accuracy Straightness Measurement and Squareness Measurement. The development concept of "1um prec.......
Setting Machine Setting Machine     (Nakaya Co. Ltd)
■For setting a saw teeth automatically. ■Any type of blades can be done by NC
Deflection Tester Deflection Tester     (Obishi Keiki Seisakusho)
Used for Circularity Measurement of shafts, etc. Parallellism between table upper surface and center is assured. Center entry/exit is performed by one touch lever. Accordin.......
Toishi (Sharpening Stones) Toishi (Sharpening Stones)     (Ikeda Tools Co., Ltd)
We market various types of toishi from various manufacturer for a variety of applications. In addition to the toishi itself, we also have stone flatners and camelia oil. Please .......
 

Order made work platforms In adition to our standard products, we design and manufacture work decks to meet the customers demands in terms of capacity, size, use environment etc.
Feel free to discuss any requirements with us. We surely can provide you with a suitable solution.
Order made work platforms
SIP Co., Ltd
Deflection Tester Used for Circularity Measurement of shafts, etc. 
Parallellism between table upper surface and center is assured. 
Center entry/exit is performed by one touch lever. 

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho
Kimono Dress We design and manufacture traditional Kimono dress specially made for each customer. 
Traditional Kimono is for that elegant ceremony in which you wish to look different. In fact you will appear like the empress of Japan.
Kimono Dress
Habuki
Top-Tooth Cutting Machine For making Japanese
Top-Tooth Cutting Machine
Nakaya Co. Ltd
Copyright © 2004-2018 Placade Japan Co. Ltd
All Rights Reserved.
All logos and trademarks in this site are
property of their respective owners
| About this site | Become a Distributor | Login
| How to Register | Looking for partners | Home
| About us | FAQ    
| Privacy policy | Site map