Industrial Supplies › Foaming Products Made-in-Japan.BZ

Sitemap
Japanese Industrial Supplies , Foaming Products products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 23, 2012, 8:37 am

Members Area

Japanese

View Gooooogled Versions

Industrial Supplies › Foaming Products

Sample Products

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Japanese Pull Saws For centuries the japanese handsaws (Nokogiri) are produced in the same tradition. Nokogiri work on the pull stroke - this enables very thin and fine blades. You will love the accuracy. There are two kinds of sawteeth - one for cutting cross the grain and one for cutting with the grain.

Our partner for Japanese pull saws is Nakaya mfg. from Sanjo-Niigata.
Nakaya is not only regarded as the leading manufacturer of the very best quality of changeable saw blades, we also develope and produce the machines to make the saw blades.

Japanese Pull Saws
Ikeda Tools Co., Ltd
Handy Belt Sander As only 1.4kg of light body, Roller Minico can be operated by one hand. The powerful torque is unimaginable from the super compact body.

Roller Minico series have a wide variety of option tools such as sanding belts, brush wheels, polishing buff, hairline wheels etc. for a wide range of applications.

Handy Belt Sander As only 1.4kg of light body, Roller Minico can be operated by one hand. The powerful torque is unimaginable from the super compact body.

Roller Minico series have a wide variety of option tools such as sanding belts, brush wheels, polishing buff, hairline wheels etc. for a wide range of applications.

Handy Belt Sander
Shinto Sangyo Co., Ltd

More Categories

Industrial Supplies
Foaming Products

Flexible Foams Foam Cushions Foam Insulation Sheets Foam Manufacturers Foam Pads Foam Products Foam Rollers Foam Rubber Foam Rubber	Foam Rubber Products Gel Cushions Hand Grips PE Foams Polyurethane Foam PU Foam Sponge Manufacturers Sponge Rubber
	Suggest a Category

New site for importers of unique Japanese office supplies and stationeries

Looking for Japanese Office Supplies, Stationeries and Equipment? Click Here

Didn't find what you are looking for?
Please search our site because you may have followed a wrong link. Thank you.

Featured Listing

F.A. MIYAISHI CO. Ltd Niigata Nagaoka
Aquarium and general fish breeding merchandise wholesale. From large size equipment to small parts, Anything needed for fish breeding. We Specialize in Nishikigoi breeding mater...
Animal & Pet Products › Pet Supplies › Fish Products

Shinto Sangyo Co., Ltd Osaka Nishi-ku
Exporters and Importers of various kinds of Abrasive Products and Tools. Our handling products include; Industrial Brush, Diamond Brush, Honing Stone, Cutting off Wheel, Sanding Bl...
Pneumatic & Hydraulic Tools › Air Tool › Abrasive Tools

Kondo Seiki Co., Ltd Niigata Mitsuke city
We manufacture various equipment for industrial use including the following; Complete set of water jet nozzles Pattern plate cams for circular knitting machine. Automatic patte...
Building Materials › Plumbing Supply › High Pressure Fittings

Showa Electronics Co., Ltd Kanagawa Sagamihara
Manufacture and sales of electronic and environmental devices. Design and execution of electric and telecommunication engineering work. Products Include: Memory coder, Automatic ...
Electrical & Electronics › Electronic Testing › Measuring Instruments

Obishi Keiki Seisakusho Niigata Nagaoka
We manufacture and sell precision measuring instruments. Some of our products include; Automatic Measuring Equipment, Special Measurement Equipment, Ultra Precision Straight Edge, ...
Electrical & Electronics › Electronic Testing › Measuring Instruments

Featured Products

	Load Control and Measurement Showa Electronics Co., Ltd
	EA/WA/EAF: The measuring instruments EA/WA/ EAF transmit and record information on the loads and accidents at AC substations and in AC systems of DC substations. They also store t.......

	Precision Granite Surface Plate Obishi Keiki Seisakusho
	Precision Surface Plate using granite gabbro It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages. In a.......

	Nishikigoi (Carps) Japan Koi Export
	A warm welcome and great koi await all koi buyers at Miyaishi Koi Farm. Based in the very heart of Ojiya, whether you are looking for high quality jumbo koi or a vast range of Tosa.......

	Power monitoring system Showa Electronics Co., Ltd
	The power monitoring system can simultaneously measure the electrical energy recorded at up to 30 watt-hour meters of the three-phase/three-wire and single- phase/two- to three-.......

	Solenoid Valves Kondo Seiki Co., Ltd
	We manufacture various types of solenoid valves. Please contact us for more.

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels)
Ikeda Tools Co., Ltd

Power monitoring system The power monitoring system can simultaneously measure the electrical energy
recorded at up to 30 watt-hour meters of the three-phase/three-wire and single-
phase/two- to three-wire types, and pulses sent from a maximum of 16-channel
watt-hour meters attached with transmitters. This is suitable for the instrumentation
for systematic power control at large plants. The data collected is stored in a
memory card, CSV-converted by a personal computer and output on a record book.

Power monitoring system
Showa Electronics Co., Ltd

Hocho - Akifusa Japanese Knives (1) We offer a broad range of Japanese kitchen knives.
Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is unsurpassed. Our product selection ranges from the noble Japanese knife to the professional knives, art work and collectors' items.

We also design knives and have them OEM made. We welcome OEM inquiries as well.

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

Special Measurement Equipment Universal Type Camshaft Measuring equipment

This eqipment is representative of our [SE 121 Model ] of camshaft shape measurement equipment is a high performance model, with automatic measurement as a presupposition, and detailed data requirement.
For this reason, in many cases, acquisition of operating skills is required for its operation.
Operation of the machine is completely manual because of the assumption that the equipment will also be used on inline processes.
It is a highly versatile camshaft measuring equipment. No special operating skills are required.
Required ideal position angle and lift amount is displayed.
Also the displayed values can be printed out from a special embedded small sized printer.

Special Measurement Equipment
Obishi Keiki Seisakusho

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly

Time Recording Products
Amano Corporation

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Precision Square Levels For precision inspection, this product is a JIS mark display permitted Grade A product.
The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjusted.
It has a V groove, making it possible for measurement of tubular type shapes.
In relation to the base, the accuracy of parallelism and squareness of all sides is assured.

Other products include;
Precision Square Level Grade A
Precision Flat Level Grade A
Square Level
Flat Level
Small Precision Level
Adjustable Level (Starlet Type)
T-Type Level
Precision Fix Level
Petite Level
Level for Spinning Machine
Cross Test Level
Pocket Level
Bench Level
Water Level
Round Type Level
Inclination Level with Micrometer
Inclination Measurement Level A100 Type
Inclination Level

Precision Square Levels
Obishi Keiki Seisakusho

Japanese Pull Saws
Ikeda Tools Co., Ltd


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Japanese Pull Saws
Ikeda Tools Co., Ltd

Time Recording Products
Amano Corporation

Input conversion unit The input conversion unit SSC-U3 has a multi-transducer function to convert three-/single-phase voltage and input current and outputs their effective values, active power, reactive power, power factor, and frequency. The unit can be directly connected to data recorders, pen recorders, and other measuring instruments.

Input conversion unit
Showa Electronics Co., Ltd

Precision Granite Surface Plate Precision Surface Plate using granite gabbro
It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages.
In addition to standard products, we also manufacture with special measurements, hole drilling, screw machining, etc.
We can also make special mounts using square pipe.

Precision Granite Surface Plate
Obishi Keiki Seisakusho