Industrial Supplies › Air Compressor › Compressor Manufacturers Made-in-Japan.BZ

Sitemap
Japanese Industrial Supplies , Air Compressor , Compressor Manufacturers products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 23, 2012, 8:25 am

Members Area

Japanese

View Gooooogled Versions

Industrial Supplies › Air Compressor › Compressor Manufacturers

Sample Products

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels)
Ikeda Tools Co., Ltd

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Japanese Pull Saws For centuries the japanese handsaws (Nokogiri) are produced in the same tradition. Nokogiri work on the pull stroke - this enables very thin and fine blades. You will love the accuracy. There are two kinds of sawteeth - one for cutting cross the grain and one for cutting with the grain.

Our partner for Japanese pull saws is Nakaya mfg. from Sanjo-Niigata.
Nakaya is not only regarded as the leading manufacturer of the very best quality of changeable saw blades, we also develope and produce the machines to make the saw blades.

Japanese Pull Saws
Ikeda Tools Co., Ltd

More Categories

Industrial Supplies
Air Compressor
Compressor Manufacturers

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Electronic watt-hour meter
Showa Electronics Co., Ltd

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Time Information System Products
Amano Corporation

Precision Granite Surface Plate
Obishi Keiki Seisakusho

Solenoid Valves We manufacture various types of solenoid valves. Please contact us for more.
Solenoid Valves
Kondo Seiki Co., Ltd

Data loggers 108/109A/109C
Showa Electronics Co., Ltd

Nishikigoi (Carps)
Japan Koi Export

Power monitoring system
Showa Electronics Co., Ltd

Synchronization testers
Showa Electronics Co., Ltd

Featured Products

Handy Belt Sander
Shinto Sangyo Co., Ltd

As only 1.4kg of light body, Roller Minico can be operated by one hand. The powerful torque is unimaginable from the super compact body. Roller Minico series have a wide variet.......

Time Information System Products
Amano Corporation

AMANO's accumulated know-how and technology for more than 70 years in time management industry offers the most advanced NETWORK TIME RECORDER linkable even with existing infrastruc.......

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Simply by connecting the CV-98USB to a computer, the length of curved lines can be measured.

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

We offer a broad range of Japanese kitchen knives. Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is uns.......

Synchronization testers
Showa Electronics Co., Ltd

The synchronization testers S25P/S25N monitor the synchronization between different power sources based on the voltage phase and voltage difference(vector difference). They then ou.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly

Time Recording Products
Amano Corporation

Pulse converter SPT-2KA The pulse converter SPT-2KA receives pulse signals from the K1, make and make-break contacts of watt-hour meters, and outputs to power control terminal devices through a contact. This output is first converted into a 1- to 1/9999-pulse signal used by the terminal devices. The power source voltage is DC 100V.

Pulse converter SPT-2KA
Showa Electronics Co., Ltd

Precision Square Levels For precision inspection, this product is a JIS mark display permitted Grade A product.
The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjusted.
It has a V groove, making it possible for measurement of tubular type shapes.
In relation to the base, the accuracy of parallelism and squareness of all sides is assured.

Other products include;
Precision Square Level Grade A
Precision Flat Level Grade A
Square Level
Flat Level
Small Precision Level
Adjustable Level (Starlet Type)
T-Type Level
Precision Fix Level
Petite Level
Level for Spinning Machine
Cross Test Level
Pocket Level
Bench Level
Water Level
Round Type Level
Inclination Level with Micrometer
Inclination Measurement Level A100 Type
Inclination Level

Precision Square Levels
Obishi Keiki Seisakusho

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho