Hardware Products & Valve › Control Valves › Fluid Valves Made-in-Japan.BZ

Sitemap
Japanese Hardware Products & Valve , Control Valves , Fluid Valves products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 23, 2012, 7:47 am

Members Area

Japanese

View Gooooogled Versions

Hardware Products & Valve › Control Valves › Fluid Valves

Sample Products

Precision Granite Surface Plate Precision Surface Plate using granite gabbro
It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages.
In addition to standard products, we also manufacture with special measurements, hole drilling, screw machining, etc.
We can also make special mounts using square pipe.

Precision Granite Surface Plate
Obishi Keiki Seisakusho

Water Jet Nozzle and Plunger Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd
Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho

More Categories

Hardware Products & Valve
Control Valves
Fluid Valves

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly
Time Recording Products
Amano Corporation

Power tester 106A The power tester 106A, which is compact and inexpensive, uses a clamp CT to measure and display the single-and three-phase voltage, current, power factor, and electrical energy. In addition, it records the data when combined with the recorder 106R.
Power tester 106A
Showa Electronics Co., Ltd

Special Measurement Equipment
Obishi Keiki Seisakusho

Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured.
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand)
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.
Precision V Blocks
Obishi Keiki Seisakusho

Harmonic power recorder The harmonic power recorder PR-300 is a portable logger to control single- and three-phase loads with a clamp CT. It analyzes harmonics and stores measurements in a memory card, from which the data is read out onto a personal computer for entry into various load control record books. It’s used to reproducevoltage/current waveforms and analyze their orders.
Harmonic power recorder
Showa Electronics Co., Ltd

Pulse converter SPT-2KA The pulse converter SPT-2KA receives pulse signals from the K1, make and make-break contacts of watt-hour meters, and outputs to power control terminal devices through a contact. This output is first converted into a 1- to 1/9999-pulse signal used by the terminal devices. The power source voltage is DC 100V.
Pulse converter SPT-2KA
Showa Electronics Co., Ltd

Hocho - Akifusa Japanese Knives (2)
Ikeda Tools Co., Ltd

Ultra Precision Straight Edge and Squares
Obishi Keiki Seisakusho

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Featured Products

AC current/voltage converters
Showa Electronics Co., Ltd

The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of.......

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Straightness Tester, repeat meters, and roll calipers. Straightness Tester On the granite standard straight edge lower surface, 3 saddle supports are attached. The accuracy s.......

Nomi (Chisels)
Ikeda Tools Co., Ltd

A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying.......

Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.

Hocho - Akifusa Japanese Knives (2)
Ikeda Tools Co., Ltd

Description: We offer a broad range of Japanese kitchen knives. Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen k.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly

Time Recording Products
Amano Corporation

Maru Nomi (Carving Tools) Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.

Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Pulse converter SPT-2KA The pulse converter SPT-2KA receives pulse signals from the K1, make and make-break contacts of watt-hour meters, and outputs to power control terminal devices through a contact. This output is first converted into a 1- to 1/9999-pulse signal used by the terminal devices. The power source voltage is DC 100V.

Pulse converter SPT-2KA
Showa Electronics Co., Ltd

Japanese Pull Saws For centuries the japanese handsaws (Nokogiri) are produced in the same tradition. Nokogiri work on the pull stroke - this enables very thin and fine blades. You will love the accuracy. There are two kinds of sawteeth - one for cutting cross the grain and one for cutting with the grain.

Our partner for Japanese pull saws is Nakaya mfg. from Sanjo-Niigata.
Nakaya is not only regarded as the leading manufacturer of the very best quality of changeable saw blades, we also develope and produce the machines to make the saw blades.

Japanese Pull Saws
Ikeda Tools Co., Ltd