Directory of Japanese products and companies in EnglishSitemap
Japanese Companies Click Here for more information
Computer & Peripherals , Computer Monitors & Displays , Industrial Monitors  products made in Japan for easy access to buyers
HOME Products and Services Made in Japan Made in Japan Made in Japan Made in Japan
May 27, 2016, 7:11 pm
Made in Japan Made in Japan
Computer & PeripheralsComputer Monitors & DisplaysIndustrial Monitors
Machinery & Parts made in Japan Machinery & Parts
Pneumatic & Hydraulic Tools made in Japan Pneumatic & Hydraulic Tools
Kitchen & Houseware made in Japan Kitchen & Houseware
Animal & Pet Products made in Japan Animal & Pet Products
Industrial Supplies made in Japan Industrial Supplies
Hardware Products & Valve made in Japan Hardware Products & Valve
Furniture made in Japan Furniture
Electrical & Electronics made in Japan Electrical & Electronics
Dies & Molds made in Japan Dies & Molds
Consumer Electronics made in Japan Consumer Electronics
Computer & Peripherals made in Japan Computer & Peripherals
Building Materials made in Japan Building Materials
Beauty & Health Products made in Japan Beauty & Health Products
Agriculture & Food made in Japan Agriculture & Food
 Sample products made in Japan Sample Products
Protect X2 The skin protection cream Protect X2 has protection effect on three types of skin troubles, same with Protect X1.
Rough dry skin (especially rough hand) 
Penetration of dirt and smell into skin. 
Skin scratch with friction.
Protect X2
Earth-Blue Inc

Noboru-kun LS-Series (Lifters) The aerial work platform
Noboru-kun LS-Series (Lifters)
SIP Co., Ltd

Natural Food Supplement [NIOWONDERFUL] This natural food supplement can be used as a trump card when upmarketing and differentiating your fish, chickens, pigs, cows, etc. \r\n No complicated preparation is required. Just mix NIOWONDERFUL with regular feed at a concentration of 0.3 ? 0.6%.
Natural Food Supplement [NIOWONDERFUL]
Flora Co., Ltd.

 More Products made in Japan More Categories
Measuring Instruments made in Japan Measuring Instruments
Hand Saws made in Japan Hand Saws
kitchen Appliances made in Japan kitchen Appliances
Kitchen Knife made in Japan Kitchen Knife
Nishikigoi made in Japan Nishikigoi
Living Room Furniture made in Japan Living Room Furniture
HOME Appliances made in Japan HOME Appliances
Custom Machines made in Japan Custom Machines
Japanese Furniture made in Japan Japanese Furniture
Executive Office Furniture made in Japan Executive Office Furniture
Cosmetic Products made in Japan Cosmetic Products
Horticulture Supplies made in Japan Horticulture Supplies
Abrasive Tools made in Japan Abrasive Tools
Check Valve made in Japan Check Valve
Hydraulics Valves made in Japan Hydraulics Valves
Computer & Peripherals
Computer Monitors & Displays
Industrial Monitors




List Your Products Here
Japanese Companies only

Order made work platforms In adition to our standard products, we design and manufacture work decks to meet the customers demands in terms of capacity, size, use environment etc.
Feel free to discuss any requirements with us. We surely can provide you with a suitable solution.
Order made work platforms
SIP Co., Ltd
Noboru-kun LS-Series (Lifters) The aerial work platform
Noboru-kun LS-Series (Lifters)
SIP Co., Ltd
Hocho - Akifusa Japanese Knives (1) We offer a broad range of Japanese kitchen knives.
Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is unsurpassed. Our product selection ranges from the noble Japanese knife to the professional knives, art work and collectors' items.

We also design knives and have them OEM made. We welcome OEM inquiries as well.
Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd
Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.
Nomi (Chisels)
Ikeda Tools Co., Ltd
Water Jet Nozzle and Plunger Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics. 

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum. 

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.
Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd
Plant Vitalizer (Granule HB-101) Granule HB-101 is a natural plant vitalizer effective for growing various kinds of plants and is made from essences of such long-lived trees as cedars, Japanese cypress, and pines as well as from plantains (a well-known medical herb). Safe and harmless, Granule HB-101 is perfect for organic and reduced-chemical cultivation.
Plant Vitalizer (Granule HB-101)
Flora Co., Ltd.
Deflection Tester Used for Circularity Measurement of shafts, etc. 
Parallellism between table upper surface and center is assured. 
Center entry/exit is performed by one touch lever. 

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho
Water Jet Nozzle and Plunger Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics. 

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum. 

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.
Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd
Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached. 
The accuracy surface is high precision and light weight. 
By moving the slider, straightness can easily be measured. 
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value 
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing. 

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily. 
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured 
Before measurement, perform zero setting on the master surface plate. 

Roll Caliper
For measuring large rolls. 
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron ) 
4 pcs of job run roller have bearings in them and they are precision grinded. 
Movement on the roll is slow and smooth. 
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work. 
A 0.01mm graduation dial gauge is supplied with the product. 

 ・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.
Straightness Measuring Instruments
Obishi Keiki Seisakusho
Featured products made in Japan Featured Products
Nomi (Chisels) Nomi (Chisels)     (Ikeda Tools Co., Ltd)
A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying.......
Japanese Pull Saws Japanese Pull Saws     (Ikeda Tools Co., Ltd)
For centuries the japanese handsaws (Nokogiri) are produced in the same tradition. Nokogiri work on the pull stroke - this enables very thin and fine blades. You will love the accu.......
Order made work platforms Order made work platforms     (SIP Co., Ltd)
In adition to our standard products, we design and manufacture work decks to meet the customers demands in terms of capacity, size, use environment etc. Feel free to discuss any r.......
Angle Measuring Equipment Angle Measuring Equipment     (Obishi Keiki Seisakusho)
Universal Angle Plate Angular Combination Block Swivel Type Angle Plate Sine Plate Double Type Sine Plate Sine Base Sine Bar Sine Base with Center Sine Bar with Cen.......
Ultra Precision Straight Edge and Squares Ultra Precision Straight Edge and Squares     (Obishi Keiki Seisakusho)
Standardized Ultra Precision Straight Edge developed due to the demand for high accuracy Straightness Measurement and Squareness Measurement. The development concept of "1um prec.......
 

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached. 
The accuracy surface is high precision and light weight. 
By moving the slider, straightness can easily be measured. 
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value 
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing. 

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily. 
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured 
Before measurement, perform zero setting on the master surface plate. 

Roll Caliper
For measuring large rolls. 
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron ) 
4 pcs of job run roller have bearings in them and they are precision grinded. 
Movement on the roll is slow and smooth. 
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work. 
A 0.01mm graduation dial gauge is supplied with the product. 

 ・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.
Straightness Measuring Instruments
Obishi Keiki Seisakusho
Precision Square Levels For precision inspection, this product is a JIS mark display permitted Grade A product. 
The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjusted. 
It has a V groove, making it possible for measurement of tubular type shapes. 
In relation to the base, the accuracy of parallelism and squareness of all sides is assured. 

Other products include;
Precision Square Level Grade A 
Precision Flat Level Grade A 
Square Level 
Flat Level 
Small Precision Level 
Adjustable Level (Starlet Type) 
T-Type Level 
Precision Fix Level 
Petite Level 
Level for Spinning Machine 
Cross Test Level 
Pocket Level 
Bench Level 
Water Level 
Round Type Level 
Inclination Level with Micrometer 
Inclination Measurement Level A100 Type 
Inclination Level
Precision Square Levels
Obishi Keiki Seisakusho
Hocho - Akifusa Japanese Knives (1) We offer a broad range of Japanese kitchen knives.
Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is unsurpassed. Our product selection ranges from the noble Japanese knife to the professional knives, art work and collectors' items.

We also design knives and have them OEM made. We welcome OEM inquiries as well.
Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd
Liquid Deodorant [ NIOINONNO ] NIOINONNO is fast acting and just one spray can instantly deodorize any bad smells in and out of the house (including from clothes, cigarettes, pets, bathrooms, etc.) and from livestock.
Liquid Deodorant [ NIOINONNO ]
Flora Co., Ltd.
Copyright © 2004-2016 Placade Japan Co. Ltd
All Rights Reserved.
All logos and trademarks in this site are
property of their respective owners
| About this site | Become a Distributor | Login
| How to Register | Looking for partners | Home
| About us | FAQ    
| Privacy policy | Site map