Computer & Peripherals › Computer Monitors & Displays › Flat Panels Monitor Arms Made-in-Japan.BZ

Sitemap
Japanese Computer & Peripherals , Computer Monitors & Displays , Flat Panels Monitor Arms products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

February 10, 2012, 9:52 pm

Members Area

Japanese

View Gooooogled Versions

Computer & Peripherals › Computer Monitors & Displays › Flat Panels Monitor Arms

Sample Products

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho
Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels)
Ikeda Tools Co., Ltd

Straightness Measuring Instruments
Obishi Keiki Seisakusho

More Categories

Computer & Peripherals
Computer Monitors & Displays
Flat Panels Monitor Arms

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Genmai Soup Genmai soup is aimed at hospitalized persons, aged persons or persons who cannot eat normal solid food, but need a simple sure way to obtain the necessary ingredients needed for the body.
It contains not additives but rice powder and natural seasoning.
Like all our products it is very easy to prepare. Just open the packet and pour hot water.
Genmai Soup
MATSUYA

Maru Nomi (Carving Tools) Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.
Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Natural Seasoning (Tennendashi)
MATSUYA

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Nishikigoi (Carps)
Japan Koi Export

Precision V Blocks 2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured.
Very convenient for round objects, and other types of inspection or as supporting block (Rectitude stand)
All sizes are hardened with 90 degrees V Groove.

According to your requirement, we can manufacture special measurement products.
Precision V Blocks
Obishi Keiki Seisakusho

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.
Nomi (Chisels)
Ikeda Tools Co., Ltd

Precision Granite Surface Plate
Obishi Keiki Seisakusho

Featured Products

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Straightness Tester, repeat meters, and roll calipers. Straightness Tester On the granite standard straight edge lower surface, 3 saddle supports are attached. The accuracy s.......

Change Valve
Kondo Seiki Co., Ltd

Mechanical & Electromagnetism Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant. .......

Solenoid Valves
Kondo Seiki Co., Ltd

We manufacture various types of solenoid valves. Please contact us for more.

Maru Nomi (Carving Tools)
Ikeda Tools Co., Ltd

Hand forged laminated steel carving tools. We have chosen a range of about 40 very common carving tools which are available as single tools or as sets. White oak handles.

Hocho - Akifusa Japanese Knives (1)
Ikeda Tools Co., Ltd

We offer a broad range of Japanese kitchen knives. Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen knives is uns.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly

Time Recording Products
Amano Corporation

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Time Recording Products
Amano Corporation

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho