Chemicals › Adhesives & Sealants › Adhesive Removals Made-in-Japan.BZ

Sitemap
Japanese Chemicals , Adhesives & Sealants , Adhesive Removals products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

May 18, 2012, 9:14 pm

Members Area

Japanese

View Gooooogled Versions

Chemicals › Adhesives & Sealants › Adhesive Removals

Sample Products

Memory recorders 107/117/114 When an accident occurs, the memory recorders 107/117S/117H are triggered
by a contact output to catch the waveforms before and after the accident, which are sent to the control office for recording through telephone lines.

Showa Electronics offers a line-up of memory recorders that cover 4 to 88 channels to catch and record the waveforms before and after accidents at the site of accident.

Memory recorders 107/117/114
Showa Electronics Co., Ltd

Nishikigoi (Carps) A warm welcome and great koi await all koi buyers at Miyaishi Koi Farm. Based in the very heart of Ojiya, whether you are looking for high quality jumbo koi or a vast range of Tosai, 2 and 3 year old koi of all varieties then make sure you visit us.

Miyaishi Koi Farm with JKX can offer a great selection of koi at the very lowest price. Established for over 60 years Miyaishi is establish as one of the leading koi breeders in Japan. Other breeders throughout Japan keep a very close relationship with them, not just for their koi but also to buy and use Miyaishi's own range of koi food for their koi and buy the large range of dry goods that they supply through their wholesale company. This close association with other breeders also benefits JKX customers when buying koi from any of these breeders. These include Aoki, Hosokai, Dainichi, Marusaka, Miyatora, Kaneko, Oofuchi, Yagenji, Otsuka, Marudo, and Torazo to name but a few.

Koi available from Miyaishi Koi Farm

A large selection of Jumbo koi from 80 - 90 cm

3 year olds - nearly 500 koi of all varieties

2 year olds - up to 4000 koi of all varieties

Tosai - up to 60,000 fish of all varieties

Nishikigoi (Carps)
Japan Koi Export

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

More Categories

Chemicals
Adhesives & Sealants
Adhesive Removals

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Japanese Pull Saws
Ikeda Tools Co., Ltd

Nishikigoi (Carps)
Japan Koi Export

AC current/voltage converters
Showa Electronics Co., Ltd

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho

Harmonic power recorder The harmonic power recorder PR-300 is a portable logger to control single- and three-phase loads with a clamp CT. It analyzes harmonics and stores measurements in a memory card, from which the data is read out onto a personal computer for entry into various load control record books. It’s used to reproducevoltage/current waveforms and analyze their orders.
Harmonic power recorder
Showa Electronics Co., Ltd

Angle Measuring Equipment Universal Angle Plate
Angular Combination Block
Swivel Type Angle Plate
Sine Plate
Double Type Sine Plate
Sine Base
Sine Bar
Sine Base with Center
Sine Bar with Centers
Universal Bevel Protractor
Large Sized Bevel Plate (Motor Drive) Example
Double Type Sine Plate (2-Way Inclination) Example
Motor-driven Sine Table Example
Rotating Tilt Table Example
Angle Measuring Equipment
Obishi Keiki Seisakusho

Time Information System Products
Amano Corporation

Featured Products

Setting Machine
Nakaya Co. Ltd

&#9632;For setting a saw teeth automatically. &#9632;Any type of blades can be done by NC

Japanese Pull Saws
Ikeda Tools Co., Ltd

For centuries the japanese handsaws (Nokogiri) are produced in the same tradition. Nokogiri work on the pull stroke - this enables very thin and fine blades. You will love the accu.......

Hocho - Akifusa Japanese Knives (2)
Ikeda Tools Co., Ltd

Description: We offer a broad range of Japanese kitchen knives. Thanks to the high art of Japanese blacksmithing, the aesthetics, cutting sharpness and edge life of these kitchen k.......

Time Recording Products
Amano Corporation

Simple, clean design fits any office decor Large, easy to read dial Surface detection function for correct printing position Perpetual calendar Automatic Daylight Saving ti.......

Change Valve
Kondo Seiki Co., Ltd

Mechanical & Electromagnetism Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant. .......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Ultra Precision Straight Edge and Squares Standardized Ultra Precision Straight Edge developed due to the demand for high accuracy Straightness Measurement and Squareness Measurement.
The development concept of

Ultra Precision Straight Edge and Squares
Obishi Keiki Seisakusho

Water Jet Nozzle and Plunger Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Water Jet Nozzle and Plunger
Kondo Seiki Co., Ltd

Full Automatic Saw Cutting Machine NC-3 Model ■This model is multi-function machine, able to process all types of handsaw blade.

Full Automatic Saw Cutting Machine NC-3 Model
Nakaya Co. Ltd

Nomi (Chisels) A nomi's working life is so much longer than that of a conventional chisel, a Japanese nomi is far cheaper and saves you the trouble involved in going through the process of buying a new one.
Hand forged laminated high grade steel used by the Japanese professional. Red oak handle, sharpened ready to use.

Nomi (Chisels)
Ikeda Tools Co., Ltd